AMPLIFICADOR ROTEL RA 314 / FUNCIONANDO

Admite ofertas

Estado del lote: Normal (con señales de uso normal)
DIRECTO DE COLECCIONISTA / FUNCIONANDO

  • Numero de transistores
  • Hay semiconductores.
  • Semiconductores
  • Principio principal
  • Amplificador de Audio
  • Gama de ondas
  • - no hay
  • Especialidades
  • Hi-Fi equipment
  • Tensión de funcionamiento
  • Red: Corriente alterna (CA, Inglés = AC) / 120; 220; 240 Volt
  • Altavoz
  • - Este modelo usa altavoz exterior (1 o más).
  • Potencia de salida
  • 50 W (60 W max.)
  • Material
  • Madera
  • Modelo: Stereo Integrated Amplifier RA-314 - Roland Electronics Co. Ltd.,
  • Forma
  • Unidad para estanteria.
  • Ancho, altura, profundidad
  • 430 x 114 x 273 mm / 16.9 x 4.5 x 10.7 inch
  • Anotaciones
  • A hi-fi stereo integrated amplifier housed in a wooden Case with an aluminium front.
  • With Left and Right Power Output meters, rotary Bass and Treble controls, rotary Tape Monitor and Function (Tuner, Phono, Aux) switches, push button switches for Speakers A and B, Low and High Filters, Loudness and Mode (Mono/Stereo), phono sockets for MM and Ceramic cartridges, Tuner and Aux input and for Tape Monitor 1 input/output, DIN sockets for cartridge input and for Tape Monitor 2 input/output, terminals for two pairs of loudspeakers, a jack for headphones and two AC outlets on some models.
  • Specification Power Amplifier Section Continuous Power Output25 watts per channel RMS both channels driven into 8Ω or
  • or 30 watts per channel both channels driven into 4Ω
  • from 20 to 20,000 Hz with no more than 0.07% Total Harmonic DistortionIntermodulation Distortion
  • (continuous rated power output)No more than 0.07%Output Speaker
  • HeadphoneA, B (4 - 16Ω), A + B (8 - 16Ω)
  • 4 - 16ΩDamping Factor35 (20 to 20,000Hz, 8Ω)Pre Amplifier Section Input Sensitivity/Impedance PHONO
  • PHONO CER
  • AUX
  • TAPE IN
  • TAPE IN (DIN Connector)2.5mV/45kΩ
  • 120mV 280kΩ
  • 150mV/40kΩ
  • 150mV/40kΩ
  • 150mV/40kΩOutput Level/Impedance
  • (5mV PHONO input) TAPE OUT
  • TAPE OUT (DIN connector)300mV/1kΩ
  • 100mV/90kΩFrequency Response PHONO (RIAA Equalization)
  • AUX, TAPE IN30Hz-15,000Hz +0.5dB,-1.0dB
  • 7Hz-50,000Hz +1dB,-1dBFilter LOW
  • HIGH30Hz (12dB/oct.)
  • 10kHz (12dB/oct.)Hum & Noise (IHF, short circuited A network, rated Power) PHONO
  • AUX, TAPE IN 78dB
  • 92dB
  • Versions/Power requirements
  • 120V AC 60Hz
  • 220V AC 50Hz
  • 240V AC 50Hz
  • 120/220/240V AC 50/60 Hz (switchable)
  • Power Consumption: 200 watts max.
  • Peso neto
  • 8 kg / 17 lb 9.9 oz (17.621 lb)
j.miguel
avatar j.miguel
Desde 15/08/2006
España (Girona)
Vendedor registrado como particular.
210,00 €